Adjusting The Drip Stand; Anti-Tip Device; Azalea Base - Seat Attachment; Calf Strap Padded - Invacare rea azalea assist User Manual

5.10 Adjusting the drip stand

The rod of the drip stand must always be placed in
a vertical position, i.e in a 90 degree angle to the
ground, no matter the position of the backrest or
the wheelchair.
90°
Height
A
1. Loosen the lever A.
2. Adjust the drip stand to the desired height.
3. Re-tighten the lever A.
Angle
A
1. Loosen the lever A.
2. Adjust to the desired angle.
3. Re-tighten the lever A.
1488727-M
90°

5.11 Anti-tip device

1. For active position B, press the spring-loaded buttons
A.
2. Raise or lower the anti-tip device.
3. Ensure that the spring-loaded buttons A pop out into
place properly in their new position.
4. For transport position C, fold the anti-tip device under
the wheelchair by pressing the spring-loaded buttons A.
5. Turn the anti-tip device to the required position.
6. Ensure that the buttons A pop out again into position.
Never forget to activate the anti-tip devices.
The anti-tip device also acts as a step tube. It is
height-adjustable and easy to adjust.
5.12 Azalea Base — seat attachment
There are four options how to attach a seat to the Azalea
base:
• Directly on the seat brackets.
• On a seat plate.
• On a seat plate with a wedge.
• With the H-bracket.
Contact your Invacare dealer for more information.
CAUTION!
Risk of damage
The one-piece moulded seat attachments might
break.
– The back should not be reclined when the
Azalea Base is equipped with one-piece
moulded seat attachments.

5.13 Calf strap padded

Accessories
29