Legrests; Angle Adjustable Legrest; Fixed Legrest - Invacare rea azalea assist User Manual

CAUTION!
Risk of pinching
– Be careful when mounting the armrest.
For adjustments see section: 4.10.1 Armrest height, page 18
and 4.10.2 Armrest depth, page 18

4.11 Legrests

For users with longer legs, the legrest attachment can
be mounted in high position. Contact your Invacare
dealer for further information.

4.11.1 Angle adjustable legrest

Angle adjustable legrests support the legs and reduces
pressure. The legrests must always be fitted with calf pads,
foot plates and heel straps. It is important to adjust the
height and angle of the legrests to obtain a good seating
position.
Adjusting the legrest height
1. Loosen screw A with an allen key.
Tools: 5 mm allen key
2. Adjust the legrest to a suitable height and the screw is
caught by one of the recesses on the legrest tube.
3. Re-tighten the screw.
Angle adjustment
WARNING!
Risk of damage
Damage on the mechanism
– Do not place anything heavy, or let children sit
on the legrest. It may cause damage to the
mechanism.
– Do not put any pressure on the legrest while
the angle is being adjusted. The lever must be
fully opened.
1488727-M
A
A
1. Pull the lever A with one hand while supporting the
legrest with your other hand.
2. When a suitable angle is obtained, let go of the lever
and the legrest will lock into one of seven preset
positions B.
For the Azalea Max four different positions are
available, see section for legrests Azalea Max.
The distance between the lowest part of the footrest
and the ground must be at least 40 mm.

4.11.2 Fixed legrest

Adjusting the legrest height
B
A
1. Loosen screw A with an allen key.
Don't touch the upper screw B.
2. Adjust the legrest to a suitable height and the screw is
caught by one of the recesses on the legrest tube.
3. Re-tighten the screw.
The distance between the lowest part of the footrest
and the ground must be at least 40 mm.
Components
19