Outer Door Panel Assembly Removal; Door Handle Removal; Inner Door Glass Removal - Viking RDSCE2305B Service Manual

Outer Door Panel Assembly Removal

1. Remove oven door (see Door Assembly
Removal).
2. Place the door, handle side down, on a
protected surface.
3. Remove screws that attach the outer door
panel assembly to the inner door panel
assembly.
4. Lift the inner door panel assembly from the
outer door panel assembly.
5. Reverse procedure for installation.

Door Handle Removal

1. Remove outer door panel assembly (see
Outer Door Panel Assembly Removal).
2. Remove screws and handle assembly from
outer door panel assembly.
3. Remove screws and slide end caps from
handle.
Note: View set screw markings thru end cap holes,
then install set screws.
4. Reverse procedure for installation.
©2012 Viking Preferred Service

Inner Door Glass Removal

1. Remove outer door panel assembly (see
Outer Door Panel Assembly Removal).
2. Remove screws and door insulation retainer
from door glass bracket holders.
3. Remove screws and door glass bracket
holder from inner door panel.
4. Remove inner door glass from inner door
panel.
5. Remove black fiberglass rope from inner
door panel.
Note: Use care with insulation, make sure to replace
any damaged or missing insulation. Keep vent
on inner door panel clear of insulation.
6. Reverse procedure for installation.
Disassembly
35