11 ARMS
11.4 Adjusting T-Arm Transfer Assists And/or Side Guards.
1.
Remove the T-Arm from the wheelchair. Refer to Installing/
Removing T-Arms on page 42.
2.
Remove the two socket screws that secure the side guard to the
bottom clamp..
Adjusting the side guards will directly affect the
position of the transfer assist.
3.
Perform one of the following:
•
Small Side Guards - Move the bottom clamp UP to one of two
mounting positions in the side guard.
•
Large Side Guards - Move the bottom clamp UP to one of
three mounting positions in the side guard.
4.
Secure the side guard to the bottom clamp with the two socket
screws.
5.
Install the T-Arm onto the wheelchair. Refer to Installing/Removing
T-Arms on page 42.
Invacare® Solara®3G/Spree 3G Wheelchair
Side Guard
Socket
Screws
FIGURE 6
Adjusting T-Arm Transfer Assists And/or Side Guards.
94
T-Arm
Bottom Clamp
Part No 1154295
Transfer
Assist