Adjusting T-Arm Transfer Assists And/Or Side Guards - Invacare A4 Owner's Operator And Maintenance Manual

SECTION 8
ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE
GUARDS (FIGURE 7)
1. Remove the T-arm from the wheelchair. Refer to INSTALLING/REMOVING
T-ARMS in this section of the manual.
2. Remove the two socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one of the following:
Small Side Guards -
Large Side Guards -
4. Re-secure the side guard to the bottom clamp with the two socket screws.
5. Install the T-arm onto the wheelchair. Refer to INSTALLING/REMOVING T-ARMS
in this section of the manual.
FIGURE 7 - ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE GUARDS
A4™AND A4™TITANIUM
Move the bottom clamp up one of two mounting positions in the side guard.
Move the bottom clamp up one of three mounting positions in the side guard.
Side Guard
Socket
Screws
Bottom Clamp
68
T-Arm
Transfer
Assist
Part No. 1110545
ARMS