Adjusting the Front to Back Angle
1.
Loosen the adjustment screw located underneath the contracture footplate. See Detail "A".
2.
Tilt the contracture footplate forward or back to the desired angle. See Detail "B".
3.
Retighten the adjustment screw.
4.
If necessary, repeat STEPS 1-3 on remaining contracture footplate
Part No 1154295
DETAIL "A"
Adjustment
Contracture
Screw
Footplate
FIGURE 3 Adjusting the Front to Back Angle
18 CONTRACTURE FOOT ASSEMBLY
DETAIL "B" - SIDE VIEW
125
Invacare® Solara®3G/Spree 3G Wheelchair
Contracture
Footplate