Adjusting T-Arm Transfer Assists And/Or Side Guards; Procedure 5 - Invacare 1080556 Owner's Operator And Maintenance Manual

ARMS
ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE
GUARDS (FIGURE 14)
1. Remove the T-arm from the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in
this procedure of the manual.
2. Remove the two (2) socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one (1) of the following:
Small Side Guards -
Large Side Guards -
4. Re-secure the side guard to the bottom clamp with the two (2) socket screws.
5. Install the T-arm onto the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in
this procedure of the manual.
Socket Screws
FIGURE 14 - ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE
Part No. 1080556 Rev. I
Move the bottom clamp up one (1) of two (2) mounting positions in the side
guard.
Move the bottom clamp up one (1) of three (3) mounting positions in the side
guard.
Side Guard
Bottom Clamp
GUARDS
37

PROCEDURE 5

T-Arm
Transfer Assist
Solara™