Contracture Footplate Height Adjustment - Invacare Solara 3G User Manual
Hide thumbs
Also See for Solara 3G:
- Service manual (160 pages) ,
- User manual (124 pages) ,
- Quick manual (8 pages)
Table of Contents
Advertisement
Contracture Platform
1.
Remove the four flat screws that secure the contracture platform to the footplate angle bracket.
2.
Move the contracture platform to one of three mounting positions.
3.
Reinstall the four flat screws and locknuts that secure the contracture platform to the footplate angle bracket. Tighten securely.
18.4 Contracture Footplate Height Adjustment
Bilateral Contracture Footplate
1.
Remove the mounting bolt, two coved washers, washer and locknut that secure the footplate bracket to the contracture support.
2.
Move the footplate bracket up/down to achieve desired height.
3.
Align one of the mounting holes in the footplate bracket with one of the seven mounting holes on the contracture support.
4.
Secure the footplate bracket to the contracture support with the mounting bolt, two coved washers, washer and locknut. Securely tighten.
5.
If necessary, repeat STEPS 1-4 on remaining contracture footplate.
Part No 1154295
Flat Screws
FIGURE 5 Depth Adjustment - Contracture Platform
127
18 CONTRACTURE FOOT ASSEMBLY
Mounting Holes
Contracture Platform
Footplate Angle Bracket
Invacare® Solara®3G/Spree 3G Wheelchair
Advertisement
Table of Contents
