Gfds Data Request Auto Request; Gfds Data Request Manual Request - Garmin G500 Pilot's Manual

4.10.5.2

GFDS Data Request Auto Request

Turn the large MFD knob to highlight "Auto Request - Update Rate."
1)
Turn the small MFD knob to select "Off" or an Update Rate. When finished
2)
selecting the Update Rate, press ENT
at each power cycle.
Figure 4-92 GFDS Data Request Auto Update Rate
4.10.5.3

GFDS Data Request Manual Request

The GFDS weather data may be updated at any time regardless of the automatic
update timing by selecting a Manual Request. When multiple requests are made,
some products are merged with the old data (SIGMETs/AIRMETs, TAFs, TFRs,
and METARs), but the old data of other products is discarded.
Turn the large MFD knob to highlight "Manual Request - Send Req."
1)
Press ENT
2) .
The update request will occur immediately. The action will be noted in the
3)
Request Status window. The Auto Request time will be reset to the selected
value.
4-94
. The Update Rate will default to "OFF"
Figure 4-93 Manual GFDS Data Request
Garmin G500 Pilot's Guide 190-01102-02 Rev. E