Additional information about the following can be displayed by panning over the display on the map:
• Infrared Satellite (IR SAT)
• SIGMETs
• AIRMETs
The map panning feature is enabled by pressing the RANGE Knob. The map range is adjusted by turning
the RANGE Knob. If the map range is adjusted while panning is enabled, the map is re-centered on the Map
Pointer.
GFDS WEATHER DATA REQUESTS
The GFDS Data Request window provides the flight crew with the options to enable or disable the requested
weather coverage area(s), choose automatic weather update intervals (if desired), and the ability to send or cancel
weather data requests. The status of the GFDS data request process is also displayed.
Before a GFDS data request can occur, a valid request coverage area must be defined from which all currently
available GFDS weather products will be retrieved. At a minimum, either the aircraft' s present position or a
waypoint (as part of a flight plan or entered directly in the 'WAYPOINT' coverage field) must be part of the request
coverage area, otherwise the request status window will indicate 'INVALID COVERAGE AREA' and the system will
not allow a request to occur.
190-00709-04 Rev. A
Figure 6-63 Panning on the GFDS Data Link Page
Garmin G1000 Pilot's Guide for the Socata TBM 850
• METARs
• TFRs
• PIREPs
HAZARD AVOIDANCE
Additional
Information
on Infrared
Satellite Data
Selected with
Map Pointer
Infrared
Satellite Data
Selected with
Map Pointer
353