Garmin G500 Pilot's Manual page 345

4) A notice on the display will indicate successful updating of the database.
5) The following display will show the databases and their current status.
Figure A-3 Database Information on the Splash Screen
6) Use the large MFD knob to select the AUX page group and then small MFD
knob to reach the System Status Page.
7) Press the DBASE soft key to place the cursor in the "DATABASE" window.
8) Turn the small MFD knob to scroll through the list and check that all databases
are current and there are no errors. If a database is highlighted in yellow, it is
either expired or the G500 can not determine the date.
9) Power down the GDU 620.
190-01102-02 Rev. E
Figure A-2 Database Loading Completed
Garmin G500 Pilot's Guide
A-3