Weather Page Map Orientation; Nexrad Data Viewing Range - Garmin G500 Pilot's Manual

4.8.6

Weather Page Map Orientation

The Orientation option sets the orientation of the Wx Data Link Map pages.
1) While viewing the Wx Data Link Map 1, 2, or 3 of the Wx page group, press the
MENU key. With "Weather Setup" highlighted, press ENT.
2) With the "Map Orientation" option active, turn the small MFD knob to change
the highlighted value.
3) Press ENT to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
4.8.7

NEXRAD Data Viewing Range

The NEXRAD Viewing Range option allows you to select the map range
where at and below the selected value NEXRAD weather products will be shown
on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected,
NEXRAD weather data will not be shown. In the figure below where 300 NM is
selected, NEXRAD data will be shown at map ranges of 300 NM and lower.
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options . The cursor flashes on the
"Weather Setup" option. Press ENT
4-40
Figure 4-26 Weather Page Map Orientation
Figure 4-27 NEXRAD Viewing Range Selection
Garmin G500 Pilot's Guide
.
190-01102-02 Rev. E