Table of Contents
Advertisement
Connecting the VIVID 9i to a Computer
Setting the SCSI ID No.
In order for the computer to recognize that the VIVID 9i is connected to the computer via the SCSI interface,
a SCSI ID No. (0 to 6) must be set for the VIVID 9i.
M
emo
SCSI ID No. 5 has been set as the default setting before shipment.
N
ote
If other devices are connected to the computer via the SCSI interface, make sure that the SCSI ID No. of the VIVID 9i
differs from those set for the devices.
[Setting Procedure]
1
Press
The MENU view will appear.
2
Press
SI SETTINGS".
3
SELECT
Press
The SCSI SETTINGS view will appear.
4
Press
SI ID".
5
SELECT
Press
The currently selected SCSI ID No. will turn to pink.
6
Press
<Settings>
• 0 to 6: SCSI ID No.
7
Press
ENTER
Setting is now complete.
N
ote
To cancel the setting and return the SCSI SETTINGS
screen to its original state, press
18
.
to locate the arrow cursor to "SC-
(or
).
ENTER
to locate the arrow cursor to "SC-
(or
).
ENTER
to select the desired SCSI ID No.
.
CANCEL
.
STANDARD
3 HQ ON
NF ON
COLOR OFF
W.B.
DEFAULT
SCSI
5
ENABLED
WHITE BALANCE
INITIAL MODE
INITIAL CONDITION
→
SCSI SETTINGS
INFO
SCSI SETTINGS
→
SCSI ID
5
TERMINATE
ENABLED
SCSI SETTINGS
SCSI ID
6
TERMINATE
ENABLED
Advertisement
Table of Contents
