Specifications - Konica Minolta VIVID 9i/VI Instruction Manual

Specifications

Model Name
Measurement Method
AF
Light-Receiving lens (Inter-
changeable)
Object Distance Range
Scan Range
Laser Scan Method
Laser Class
X Direction Input Range
(In Extended mode)
Y Direction Input Range
(In Extended mode)
Z Direction Input Range
(In Extended mode)
Accuracy
Precision (Z, σ)
Input Time (per scan)
Transfer Time to Host Computer
Ambient Lighting Condition
Imaging Element
Number of Output Pixels
Output Format
Data File Size
Viewfinder
Output Interface
Power
Dimensions
Mass
Operating temperature/
humidity range
Storage temperature/
humidity range
The above specifications are subject to change without prior notice.
52
Non-contact 3D digitizer VIVID 9i/VI-9i
Triangulation, light block method
Image surface AF (contrast method), Active AF
TELE : Focal distance f=25 mm
MIDDLE: Focal distance f=14 mm
WIDE : Focal distance f=8 mm
0.5 to 2.5 m
0.6 to 1.0 m (In Standard mode), 0.5 to 2.5 m (In Extended mode)
Galvano mirror
Class 2 (IEC60825-1), Class 1 (FDA), Max. 30 mW, 690 nm
93 to 463 mm (TELE), 165 to 823 mm (MIDDLE),
299 to 1495 mm (WIDE)
69 to 347 mm (TELE), 124 to 618 mm (MIDDLE),
224 to 1121 mm (WIDE)
26 to 680 mm (TELE), 42 to 1100 mm (MIDDLE),
66 to 1750 mm (WIDE mode)
TELE XYZ: ±0.05 mm/ ±0.10 mm
MIDDLE XYZ: ±0.10 mm/ ±0.20 mm
WIDE XYZ: ±0.20 mm/ ±0.40 mm
(Conditions: Distance 0.6 m/ 1.0 m, KONICA MINOLTA SENSING's standard 3D
chart, KONICA MINOLTA SENSING's processing software, temperature 20ºC, rela-
tive humidity 65% or less)
TELE 0.008 mm/ ±0.024 mm
MIDDLE 0.016 mm/ ±0.048 mm
WIDE 0.032 mm/ ±0.096 mm
(Conditions: Distance 0.6 m/ 1.0 m, KONICA MINOLTA SENSING's standard 2D
chart, KONICA MINOLTA SENSING's processing software, temperature 20°C, rela-
tive humidity 65% or less)
2.5 sec.
Approx. 1.5 sec.
Office environment, 500 lx or less
3D data : 1/3-inch frame transfer CCD (340,000 pixels)
Color data : Common with 3D data (color separation by rotary filter)
3D data : 640 × 480 (HIGH QUALITY ON : 640×460)
Color data : 640 × 480
3D data: Konica Minolta format, & (STL, DXF, OBJ, ASCII points, VRML)
(Converted to 3D data by the Polygon Editing Tool Software / standard accessory)
Color data : RGB 24-bit raster scan data
Total 3D and color data capacity: 3.6 MB per data
5.7-inch LCD (320 × 240 picture elements)
* There may be rare cases in which the point that is normally lit or unlit may break up
(dot break up); however, this will not have any influence on the scanning data.
SCSI II (DMA synchronous transfer)
Commercial AC power, 100-240 V
221 (W) × 412 (H) × 282 (D) mm
Approx. 15 kg (with lens attached)
temperature range of 10 to 40°C (50°F to 104°F) at relative humidity 65% or less with
no condensation
*For North America: temperature range of 10 to 40°C, and relative humidity 50% or
less (at 40°C) with no condensation
temperature range of 0 to 40°C, and relative humidity 85% or less (at 35°C) with no
condensation
(50-60Hz), rated current 0.6 A (at 100 V AC)