Configure Other Settings Relating To Monitors [Advanced Setup] - Panasonic WJ-NX400K Operating Instructions Manual

[Setup via recorder's main monitor]
Configure other settings relating to monitors
[Advanced setup]
Configure the audio output setting of the monitor and select the video format sent to the sub monitor.
[Audio output camera]
The camera channel whose audio is output from the
recorder will be fixed. To fix the camera channel,
select the camera whose audio is to be output from
the recorder.
Selected camera: Does not fix the camera chan-
nel (The recorder will output the audio of the
camera whose images are being displayed.)
Cam.1 - Cam.64: Fixes the camera channel (The
recorder will always output the audio of the
selected camera.)
Default: Selected camera
[Video format of sub-monitor (BNC)]
Select NTSC system/PAL system as analogue video
to the sub monitor (BNC).
■ Other setup
[Detect a power-off of the sub monitor (HDMI)]
When the sub monitor is to be used and the check-
box is marked, the error action will be taken if the sub
monitor is disconnected or the power is off.
Note:
• Depending on the monitor, it may not be detected
even if the power switch of the monitor is turned off.
48