Panasonic WJ-NX400K Operating Instructions Manual page 76

Menu/Tab Setting item (including those of the
"Advanced setup" menu)
Camera setup Transmission
priority
Refresh
interval
Upside-down
Image rotation Image rotation
Pan/tilt-flip
Super
Dynamic
(Wide dynamic
range)
Adaptive black
stretch
Back light
compensation
(BLC)
Light control
mode
Auto slow
shutter
(Maximum
shutter)
Day & Night
(IR/electrical)
Intelligent auto Intelligent auto
VMD alarm
Advanced Connection method
setup
Available range
Stream2 Checked/Not checked
Burst tolerance level High, Middle, Low
Control time period 1 h, 6 h, 24 h, 1 week
Priority setting Image quality priority, Frame
rate priority
Smart coding (GOP Off, On (Advanced)
control)
Camera selection Checked/Not checked
Refresh interval 0.2 s, 0.5 s, 1 s, 2 s, 3 s
Camera selection Checked/Not checked
Upside-down On (desktop), Off (ceiling),
Wall
Camera selection Checked/Not checked
0 ° (Off), 90 °, 180 ° (Upside-
down), 270 °
Camera selection Checked/Not checked
Pan/tilt-flip Off, On
Camera selection Checked/Not checked
Super Dynamic Off, On, On (High)
(Wide dynamic range)
Camera selection Checked/Not checked
Adaptive black stretch Off, On
Camera selection Checked/Not checked
Back light Off, On
compensation (BLC)
Camera selection Checked/Not checked
Light control mode Outdoor scene, Indoor
scene, Indoor scene(60Hz)
Camera selection Checked/Not checked
Auto slow shutter Off(1/30 s), Max. 2/30s,
(Maximum shutter) Max. 4/30s, Max. 6/30s,
Max. 10/30s, Max. 16/30s
Camera selection Checked/Not checked
Day & Night Off, On, Auto1(Normal)/Auto,
(IR/electrical) Auto2(IR Light)/Auto3(SCC)
Camera selection Checked/Not checked
Off, On
Camera selection Checked/Not checked
VMD alarm Off, On
Camera selection Checked/Not checked
Detection sensitivity 1(Low), 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15(High)
RTP, RTSP, Internet mode
76
Default Remarks
◎
RTSP