Panasonic WJ-NX400K Operating Instructions Manual page 191

Indication Description
Status Format error:
RAID5 1down:
RAID5 2down:
RAID6 1down:
RAID6 2down:
RAID6 3down:
HDD RAID5 Recovery failure:
HDD RAID6 Recovery failure:
Copy media FULL:
Number of data on the copy medium
exceeded:
Starting RAID5 recovery:
Starting RAID6 recovery:
Complete RAID5 recovery:
Complete RAID6 recovery:
Network link down detection:
Power failure detection:
Power failure recovery:
Camera SD memory card error:
Camera SD memory write start command
error:
Camera SD memory write completion
command error:
Camera SD List failure:
Camera SD Image acquisition failure:
Camera SD Image delete failure:
Camera SD Accumulated recording time
warning:
Camera SD Overwrite warning:
Camera SD Access error:
Camera failure (*):
Exchange notification of wiper rubber of
camera (*):
* For WV-SUD638 camera only
Main unit: MAIN-y SINGLE FORMAT ERROR
MAIN RAID5 FORMAT ERROR
MAIN RAID6 FORMAT ERROR
Extension unit: EXTx-y SINGLE FORMAT ERROR
EXTx RAID5 FORMAT ERROR
EXTx RAID6 FORMAT ERROR
MAIN RAID5 1 DOWN
EXTx RAID5 1 DOWN
MAIN RAID5 2 DOWN
EXTx RAID5 2 DOWN
MAIN RAID6 1 DOWN
EXTx RAID6 1 DOWN
MAIN RAID6 2 DOWN
EXTx RAID6 2 DOWN
MAIN RAID6 3 DOWN
EXTx RAID6 3 DOWN
MAIN RAID5 RECOVERY FAILURE
EXTx RAID5 RECOVERY FAILURE
MAIN RAID6 RECOVERY FAILURE
EXTx RAID6 RECOVERY FAILURE
COPY MEDIUM FULL
OVER LIMITATION ON COPY MEDIUM
MAIN-y RAID5 RECOVERY START
EXTx-y RAID5 RECOVERY START
MAIN-y RAID6 RECOVERY START
EXTx-y RAID6 RECOVERY START
MAIN RAID5 RECOVERY COMPLETE
EXTx RAID5 RECOVERY COMPLETE
MAIN RAID6 RECOVERY COMPLETE
EXTx RAID6 RECOVERY COMPLETE
NETWORK LINK ERROR
POWER LOSS
POWER RECOVERED
CAM xxx SD ERR
CAM xxx SD START ERR
CAM xxx SD END ERR
CAM xxx GET LIST ERR
CAM xxx GET IMG ERR
CAM xxx DEL IMG ERR
CAM xxx SD LIFE WARNING (LONG-TERM)
CAM xxx SD LIFE WARNING (OVER-REWRITTEN)
CAM xxx SD ACCESS ERROR
CAM xxx HARDWARE ERROR
CAM xxx REPLACE WIPER RUBBER
191