Panasonic WJ-NX400K Operating Instructions Manual page 39

[Setup via recorder's main monitor]
[Main monitor action]
While the main monitor is displaying the operation
window, select whether or not to switch to 1-screen
display in association with alarm occurrence.
On: Switch the monitor display in association with
alarm occurrence.
On(ACK/RESET): Switches the monitor display
linking with the alarm confirmation and reset-
ting.
Off: Does not switch the monitor display.
Default: Off
Note:
• When "On(ACK/RESET)" is selected, the monitor
will not be switched and keeps displaying the
same camera images even when a different alarm
occurred while the main monitor action is enabled.
When the alarm reset signal is input to the
ALARM/CONTROL connector, the monitor
switches and shows the different camera images.
If multiple alarms occur while the main monitor
action is enabled, the camera number will be
memorized in sequence.
• The images from the camera selected for
"Recording camera" of "Advanced setup" are dis-
played on a 1-screen.
• The main monitor action will not be activated
while recorded images are being played back or
the setup menu is being displayed.
• When the auto reset time have passed, it will
return to the previously displayed screen. (When
the mouse is operated while the main monitor
action is being taken, it will not return to the previ-
ously displayed screen.)
[Event type]
Displayed when "On" or "On(ACK/RESET)" is
selected for "Main monitor action".
A event type to be linked is selected.
[Display]
Displayed when "On" or "On(ACK/RESET)" is
selected for "Main monitor action".
It selects the display in which the main monitor action
to be displayed.
Ctrl screen: Displays in the Ctrl screen.
Wide view: Displays in the Wide view.
■ Advanced event setup
Configure advanced settings for individual alarm types
(terminal alarm, camera site alarm, and command
alarm). Clicking the [Advanced >] button for each item
will open the respective "Advanced setup".
39