Table of Contents
Advertisement
[Setup via recorder's main monitor]
[Secret view]
Secret view is a function that causes the camera
image displayed on a 1-screen or the selected cam-
era image on a multiscreen on the main monitor to be
displayed as a black screen on the sub monitor.
Determine whether or not to use secret view.
On: Enables the secret view function.
Off: Disables the secret view function.
Default: Off
Note:
• While "1-screen live sequence" is being per-
formed, the secret view images will be skipped
(not displayed).
• The image on the sub monitor may momentarily
go black when images are switched on the main
monitor.
Configure other settings relating to monitors
[Advanced setup]
Configure the audio output setting of the monitor and select the video format sent to the sub monitor.
[Audio output camera]
The camera channel whose audio is output from the
recorder will be fixed. To fix the camera channel,
select the camera whose audio is to be output from
the recorder.
Selected camera: Does not fix the camera chan-
nel (The recorder will output the audio of the
camera whose images are being displayed.)
Cam.1 - Cam.32: Fixes the camera channel (The
recorder will always output the audio of the
selected camera.)
Default: Selected camera
[Video format of sub-monitor (BNC)]
Select NTSC system/PAL system as analogue video
to the sub monitor (BNC).
Note:
• If you want the audio output from the monitor, set
"On" in "Audio" of the "Advanced recording setup"
(☞ Page 38).
■ Other setup
[Detect a power-off of the sub monitor (HDMI)]
When the sub monitor is to be used and the check-
box is marked, the error action will be taken if the sub
monitor is disconnected or the power is off.
Note:
• Depending on the monitor, it may not be detected
even if the power switch of the monitor is turned off.
[Display 1-screen live image on stream 2]
Mark the checkbox to display 1-screen live image on
stream 2.
49
Advertisement
Table of Contents
