Panasonic WJ-NX400K Operating Instructions Manual page 142

[Operation via recorder's main monitor]
Step 3
Set copying conditions following the instructions on
the screen.
Clicking [Next]/[Back] button switches the page.
Item
Camera selection
Date & Time range Specify times and dates to define the
Free:
The remaining space of the storage medium will be
displayed.
Data size:
The total volume of all recorded images to be cop-
ied (including the viewer software) will be displayed.
* Indicated as *.** GB while the data volume is
being calculated.
* When the calculated value exceeds the remaining
volume during calculation, ">" will be indicated in
front of the data size, and the calculation stops.
* If ">" is indicated even though the calculated
value is smaller than the remaining volume, it
means that over 10000 of recorded data exists as
target.
Description
Check the number of the camera
whose recorded data is to be copied.
Checking [All] will copy the recorded
data of all cameras.
range for copying recorded data. Set
the year, month, date & time of the
start point and end point.
It is also possible to set the start point
and end point of the filter range by
clicking the [Start]/[End] buttons after
clicking the desired date on the
calendar and then selecting the
desired time in the [Playback] box.
Note:
• To attach a code for alteration detection, click the
[Advanced] button. On the advanced setup win-
dow, set [Attach the alteration detection code] to
"On".
• When you assign a password to the data that you
will copy, click the [Advanced setup] button and
set "On" for [Assign a password] on the displayed
advanced setup screen.
• Clicking the [Back] button will return to the copy
panel.
Step 4
Click the [Copy] button on the copy panel.
→ If [Assign a password] is set to "On", the pass-
word entry screen will be displayed.
Otherwise proceed to Step 6.
142