Panasonic WJ-NX400K Operating Instructions Manual page 43

[Setup via recorder's main monitor]
On: Uses the SD memory backup function.
Off: Does not use the SD memory backup function.
Default: Off
SD backup rec.
The SD memory backup is a function to save images
on the SD memory card inserted in the camera when
the recorder fails to communicate with the camera
during the set recording time.
The SD memory backup is only available if the cam-
era supports the SD memory recording and the com-
pression is set to H.264/H.265.
The SD memory recording is done by the registered
compression of the camera.
Note:
• If the camera is set to "Not use" the SD memory
card or the SD memory card is not inserted
(including insufficient insertion), error messages
are displayed some times in a day and recording
is paused for about 20 seconds.
Acquire the image saved on the SD memory card
Acquire the image saved on the SD memory card to
the recorder and record it to the HDD.
Acquisition of images from the SD memory card is
automatically done a quarter past every hour.
(0:15, 1:15, ∙∙∙23:15)
You can check whether the recorder is acquiring the
SD memory data on the "Status display area".
Important:
• When the recording starting time set on the sched-
ule has arrived without communication between
the camera and the recorder, the SD memory
backup will not be executed.
• Do not set the SD memory backup function to the
same camera from multiple network disk recorders.
• The recording time of the acquired SD memory
data will be time of the camera. Adjust time of the
camera and the recorder using the NTP function
and the camera time auto synchronization func-
tion. If time is not adjusted, the SD memory
backup may not be available.
Note:
• All images may not be acquired at one time due to
the time between time tables of the schedule and
the total capacity of the images. The remaining
images will be acquired at the subsequent acqui-
sition time.
• The image is not acquired during the following
cases. Playing the image/HTTP downloading/
Emergency recording/External recording
• If the following operations occur during acquiring
the SD memory data, the acquisition is paused.
Login/Emergency recording/External recording/
Daylight saving time table
[Sub-stream recording]
Set On/Off of the sub-stream recording*.
On: Uses the sub-stream recording.
Off: Does not use the sub-stream recording.
Default: Off
* The sub-stream recording is a function to record
low-resolution image (less data volume) in addition
to the normal live image/recording image from cam-
eras. Use it when you want to play back image effi-
ciently while the unit is recording the high resolution
image.
[Special days]
Assign a schedule of another day individually as a
special day.
For example, if you set "January 1st" to "Sunday", the
recording will be performed as on Sunday, no matter
which day of the week January 1st is actually on.
The following screen of the special day will be dis-
played when the [Setup >] button is clicked.
[Month] [Day]
Select a date that you want to set as a special day.
[Day]
Select a day whose schedule you want to use.
Default: None
43