Panasonic WJ-NX400K Operating Instructions Manual page 63

[Setup via recorder's main monitor]
Note:
• The recovery progress information is displayed
during the RAID recovery.
■ SD card information of camera
The SD card information and the SD memory backup
progress of the camera in which the SD memory
backup is set are displayed. Click [View >] button to
display the following screen.
[Software] Displays the software version of the cam-
era.
[SD card model number] Displays the model number
of the SD memory card used for the camera.
[Operation time] Displays the operation time of the SD
memory card used for the camera.
[Overwrite time] Displays the number of the overwrit-
ing of the SD memory card used for the camera.
[Backup progress information] Displays the progress
of the SD memory backup.
Date & time display: Date and time of the image
being acquired from the SD memory card of
the camera.
- : No image data to be acquired from the SD
memory card of the camera is available.
Note:
• Read "readme.txt" in the CD-ROM provided with
the recorder for applicable cameras.
[Operation mode of HDD]
Operation mode of HDD will be displayed.
Refer to page 72 for further information.
[Capacity]
Displays the capacities of the hard disk drives.
[Operation]
Displays the operating time of the hard disk drives.
[Status]
Displays the statuses of the hard disk drives.
Normal: Hard disk drives that are operating nor-
mally
Playback-only: Hard disk drives for playback use
only (Recording is unavailable.)
Removed: Hard disk drives that are excluded
from operation due to fault
Error: Hard disk drives that have become faulty
during the format process
Blank: No HDD connected
Added: HDD cannot be used until it is formatted
[Recorded time range]
Displays the time range of the images recorded on
the hard disk drives.
Note:
• When using in RAID5/RAID6 mode, "Capacity",
"Status" and "Recorded time range" will be dis-
played in the "HDD1" section of each extension
unit. Running time will be displayed for each hard
disk drive respectively.
[Overwrite cycle]
Calculates and indicates the overwriting cycle of the
hard disk drives, based on the past recording perfor-
mance (the date & time of the oldest recorded data,
the current date & time and the capacity of the hard
disk drive).
Note:
• While overwriting recording is being performed,
the overwriting cycle will be calculated based on
the date & time of the oldest recorded data and
that of the newest recorded data.
• The more often the recording was performed in
the past, the more accurate the calculation of
overwriting cycle will be.
• When the recording conditions are changed or
when data is automatically deleted, the overwrit-
ing cycle will not be indicated accurately.
63