Restarting The Dfl-500; Shutting Down The Dfl-500; System Status Monitor - D-Link DFL-500 User Manual

Restarting the DFL-500

Use the following procedure to restart the DFL-500 from the web-based manager.
•
Go to System > Status .
•
Click Restart.
The DFL-500 restarts.

Shutting down the DFL-500

Use the following procedure to shutdown the DFL-500 from the web-based manager.
•
Go to System > Status .
•
Click Shutdown.
The DFL-500 shuts down and all traffic flow through the firewall stops.
The DFL-500 can only be restarted after shutdown by turning the power off and on.

System status monitor

You can use the system status monitor to view system activity including the number of active connections to
the DFL-500 and information about the connections. The system status monitor also displays system
statistics such as CPU and memory usage.
To view system status:
•
Go to System > Status > Monitor .
The system status monitor display appears:
•
Click Refresh to update the information displayed.
System status monitor
At the top of the display, the system status monitor shows:
CPU usage
The current CPU usage statistics of the DFL-500.
Memory usage The percentage of available memory being used by the DFL-500.
Up time
The number of days, hours, and minutes since the DFL-500 was last started.
Each line of the system status monitor displays the following information about each active firewall connection.
Protocol
The service type or protocol of the connection.
From IP
The source IP address of the connection.
From Port The source port of the connection.
To IP
The destination IP address of the connection.
DFL-500 User's Manual
92