Restart/Reset; Restarting The Dfl-1100; Restoring System Settings To Factory Defaults - D-Link DFL-1100 User Manual

Network security firewall

Hide thumbs Also See for DFL-1100:

Table of Contents

Restart/Reset

Follow these steps to restart the DFL-1100.

Step 1. Choose if you want to do a quick or full restart.

Step 2. Click Restart Unit and the unit will restart.

Use the following procedure to restore system settings to the values set at the factory. This

procedure may change the DFL-1100 firmware version to a lower version (if it has been

upgraded).

This procedure deletes all of the changes that you have made to the DFL-1100 configuration

and reverts the system to its original configuration including resetting interface addresses.

Table of Contents

Netdefend dfl-1100