Traffic Shaping; Adding Traffic Shaping To A Policy - D-Link DFL-500 User Manual

•
Click Apply to save your changes.

Traffic shaping

You can use traffic shaping to guarantee the amount of bandwidth available through the firewall for a policy.
Guarantee bandwidth to make sure that there is enough bandwidth available for a hi-priority service.
You can also use traffic shaping to limit the amount of bandwidth available through the firewall for a policy.
Limit bandwidth to keep less important services from using bandwidth needed for more important services.

Adding traffic shaping to a policy

You can add traffic shaping to any type of policy. The following procedure describes adding traffic shaping to
an Int to Ext policy.
•
Go to Firewall > Policy > Int to Ext .
•
Choose a policy to add traffic shaping to and click Edit
•
Turn on traffic shaping.
•
Configure traffic shaping for the policy:
Guaranteed bandwidth Available in a future release.
Maximum bandwidth
Traffic Priority
•
Click OK to save your changes to the policy.
DFL-500 User's Manual
Available in a future release.
Select high, medium, or low.
.
41