D-Link DFL-500 User Manual page 91

You can restore your system settings by uploading a previously downloaded system settings text file to the
DFL-500.
Default NAT mode system configuration
When the DFL-500 is first powered up or when it is reset to default, the system has the following standard
configuration:
•
Operation Mode: Network Address Translation
•
Internal Address: 192.168.1.99, mask 255.255.255.0
•
External Address: 192.168.100.99, mask 255.255.255.0
•
Management Address: 10.10.10.1, mask 255.255.255.0
•
Administrator Name: admin, Password: blank
•
Idle time out: 5 minutes
•
Auth time out: 15 minutes
•
Internal administration: HTTPS enabled, PING enabled, SSH disabled
•
External administration: HTTPS disabled, PING enabled, SSH disabled
•
DHCP server: disabled
•
SNMP: disabled
•
All outgoing traffic: allowed
•
All incoming traffic: blocked
•
Internal Address: Internal_All
•
External Address: External_All
•
One-time schedule: none
•
Recurring schedule: Always
•
Anti-virus for HTTP: Low
•
Anti-virus for POP3, SMTP, and IMAP: Low
•
Worm protection: Disabled
Default Transparent mode system configuration
When the DFL-500 is first switched to transparent mode or when it is reset to default and run in Transparent
mode, the system has the following standard configuration:
•
Administrator Name: admin, Password: blank
•
Idle Time-out: 5 minutes
•
Management Address: 192.168.1.99, mask 255.255.255.0
•
Management administration: HTTPS enabled, PING enabled, SSH enabled
•
SNMP: disabled
•
All outgoing traffic: allowed
•
All incoming traffic: blocked
•
Internal Address: Internal_All
•
External Address: External_All
•
One-time schedule: none
•
Recurring schedule: Always
DFL-500 User's Manual
91