Restarting The Dfl-500 Npg; Shutting Down The Dfl-500 Npg; System Status Monitor - D-Link D DFL-500 DFL-500 Manual

The DFL-500 NPG changes operation mode.
•
To reconnect to the web-based manager, browse to the interface that you have configured for
management access using https:// followed by the IP address of the interface.

Restarting the DFL-500 NPG

Use the following procedure to restart the DFL-500 NPG:
•
Go to System > Status .
•
Select Restart.
The DFL-500 NPG restarts.

Shutting down the DFL-500 NPG

Use the following procedure to shut down the DFL-500 NPG:
•
Go to System > Status .
•
Select Shutdown.
The DFL-500 NPG shuts down and all traffic flow stops.
The DFL-500 NPG can only be restarted after shutdown by disconnecting and reconnecting the
power.

System status monitor

You can use the system status monitor to view system activity, including the number of active communication
sessions and information about each session.
The system status monitor also displays DFL-500 NPG CPU usage, memory usage, and system up-time
statistics.
To view system status:
•
Go to System > Status > Monitor .
The system status monitor appears.
•
To page through the list of connections, select Page Up
•
Select Refresh
•
You can select Clear
DFL-500 User Manual
to update the information displayed.
to stop any active communication session.
and Page Down .
86