Starting The Firewall Setup Wizard; Reconnecting To The Web-Based Manager; Completing Your Pppoe Configuration - D-Link DFL-500 User Manual

DFL-500 login page

Starting the firewall setup wizard

To start the firewall setup wizard:
Click the Wizard button at the upper right of the web-based manager.
•
Select the operating mode: Network Address Translation (NAT) or Transparent.
•
If you selected Network Address Translation (NAT), use the information that you gathered in
configuration information
If you selected Transparent, use the information in
the wizard fields. Click the next button to step through the wizard pages.
•
Confirm your configuration settings and then click Finish and Close.

Reconnecting to the web-based manager

If you changed the IP address of the internal interface or switched to Transparent mode while using the
firewall setup wizard, you must reconnect to the web-based manager using a new IP address:
•
In NAT mode if you changed the IP address of the internal interface, browse to https:// followed by the
new IP address of the internal interface
•
In Transparent mode, browse to https:// followed by the Transparent mode Management IP address
Otherwise, you can reconnect to the web-based manager by browsing to https://192.168.1.99.

Completing your PPPoE configuration

If you configured the external interface to use PPPoE you must add your PPPoE user name and password.
From the web-based manager:
•
Go to System > Network > IP Address .
•
Click and type your PPPoE user name and password.
•
Click OK.
You have now completed the initial configuration of the DFL-500, and you can proceed to connect the DFL-
500 to your network using the information in
DFL-500 User's Manual
to fill in the wizard fields. Click the next button to step through the wizard pages.
Connecting the DFL-500 to your
Transparent mode configuration information
network.
NAT mode
to fill in
18