Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
Before You Begin
1. If you purchased this Firewall to share your high-speed Internet connection with
other computers, you must have either an Ethernet-based Cable or DSL modem
with an established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for configuring
the DFL-80 VPN Firewall. The DFL-80 acts as a DHCP server and will assign all
the necessary IP address information on your network. See Appendix at the end
of this Quick Installation Guide or the Manual on the CD-ROM for setting each
network adapter to automatically obtain an IP address.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DFL-80 4-Port Ethernet VPN Firewall
CD-ROM (containing Manual and Warranty)
Ethernet (Straight Through) Cable
5V DC Power Adapter
specifications subject to change without notice. DFL-80. 03142003
1
DFL-80
4-Port Ethernet
VPN Firewall
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
Part No. IG-BDFL80
Advertisement
Table of Contents
Related Manuals for D-Link DFL-80
Summary of Contents for D-Link DFL-80
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DFL-80. 03142003... - Page 2 1. Power off your Cable or DSL modem; some devices may not have an on/off switch and will require you to unplug the power adapter. Now, the DFL-80 should be powered on and the Cable / DSL modem should be turned off.
- Page 3 The DFL-80 Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DFL-80 LOCAL NETWORK LEDs – a solid light on the port indicates a connection to an Ethernet enabled computer on ports 1-4.
-
Page 4: Using The Setup Wizard
When you have completed the steps in this Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.1.1” URL address box. Then press the Enter or Return key. The log-on pop-up screen will appear. Type “admin”... - Page 5 The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Setup Wizard You will see the following screens Click Next Set up your new password. You have the option to establish a password, for the Admin account Click Next...
- Page 6 The Setup Wizard (continued) Choose your time zone from GMT time. Click on Assist to select your time zone from the available selections. Click Next Select your Internet Connection. You will be prompted to select the type of Internet connection for your network.
- Page 7 The Setup Wizard (continued) If you selected Dynamic IP Address, this screen will appear: (Used mainly for Cable Internet service.) Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address.
- Page 8 The Setup Wizard (continued) If your ISP uses PPPoE (Point- to-Point Protocol over Ethernet), and this option is selected, then this screen will appear: (Used mainly for DSL Internet service.) Please be sure to remove any existing PPPoE client software installed on your computers.
- Page 9 Your Setup is Complete! Click Restart Please wait for the DFL-80 to save the changes and reboot. When the DFL-80 has finished rebooting, you will be brought back to the main web page.
-
Page 10: Test Internet Connection
Test Internet Connection. You will be returned to the main web page. Click to Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Manual located on the CD. - Page 11 To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DFL-80 Firewall. Microsoft Windows XP: Go to Start > right click on My Network Places >...
- Page 12 Apple Macintosh OS X: Go to the Apple Menu Click on Network and Select System Preferences Select Built-in Ethernet in the Show pull down menu Select Using DHCP the Configure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear...
- Page 13 Please note the differences in the IP addresses for each site. We will begin by configuring the DFL-80 at Site A . Start by going into the web configuration. Once in, go to the VPN menu. You should now be under VPN>Autokey...
- Page 14 There should now be a VPN policy created for Site A. Site A is now complete, we will now configure Site B with the other DFL-80. Follow the same steps previously with Site A to create a VPN policy. Please change the appropriate IP information.
- Page 15 Please fill in the appropriate information for Site B Name: Site_B From Source: Internal Subnet/Mask: 192.168.20.0/255.255.255.0 Remote Gateway – Fixed IP: 192.170.0.100 Subnet/Mask: 192.168.10.0/255.255.255.0 Authentication Method: Preshare Preshare Key: 123456 Encapsulation: Encryption (ESP) Click 123456 is an example of a preshare key, please fill in any secret preshare key you desire.
-
Page 16: Technical Support
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.