Restart / Reset; Restarting The Dfl-1100 - D-Link DFL-1100 Installation Manual

Network security firewall

Hide thumbs Also See for DFL-1100:

Table of Contents

Restart/Reset

Restart / Reset

The Restart / Reset window can be found by going to the Tools tab and clicking on the Reset button.

1. Select quick or full restart. A quick restart will reset the interfaces and re-read the configuration. A full restart is the

same as starting up after the unit has been powered off.

2. Click on the Restart Unit button and the unit will restart.

Reset System Settings to Factory Defaults

If you reset the system settings to the factory defaults, you will lose all changes that you've made to the DFL-1100

configuration. The system reset will also revert to the original firmware version if the unit's firmware has been upgraded.

To reset the factory default settings, click the Reset to Factory Defaults button.

DFL-1100 Installation Guide

Table of Contents

Netdefend dfl-1100