17. Press the OK button.
To avoid indenting or creasing the paper, remove it from the paper path and roll it up when you are not
printing.
Note: Store roll paper on its end or horizontally (if the packaging end-caps are installed). Never store roll
paper on its edge, as a flat spot can develop and lead to imaging artifacts on the prints.
Parent topic:
Roll Paper Handling
Related references
Available Epson Papers
Related tasks
Removing Roll Paper
Cutting Roll Paper
The printer's a built-in cutter can automatically cut most paper types, or you can cut your prints manually.
You can switch between cutting methods on the control panel or in the printer driver. The setting
selected in the printer driver overrides the control panel setting.
Note: If you are using the optional Auto Take-up Reel, disable the Auto Cut setting in the printer driver
and on the control panel.
Caution: You should not use the built-in cutter with these paper types or you may damage or dull the
built-in cutter:
• Fine art paper
• Canvas
• Vinyl
• Matte poster board
• Adhesive paper
• Banner media
When you print on these paper types, disable the Auto Cut setting and cut off your prints manually.
25