Setting
Options
USB Timeout
10 seconds to 600 seconds
Restore Settings
—
Printer Status settings
Setting
Firmware Version
Option Status
Print Status Sheet
Calibration Date
Network Setup settings
Setting
IP Address Setting
IPv6 Setting
IEEE802.1x Setting
HTTPS Redirect Setting
Options
Description
—
Displays the printer's firmware version.
—
Displays the status of any installed optional
accessories.
—
Prints a sheet listing the current printer
settings.
—
Displays the date that the Epson Color
Calibration Utility was last run, if applicable.
Options
Description
Auto
Determines whether IP addresses are
obtained automatically through DHCP or
Panel
manually. Select Panel to enter an IP
address, subnet mask, and default gateway
address.
On
Enables IPv6 communication.
Off
On
Enables the IEEE802.1x network protocol.
Off
On
Automatically redirects network traffic sent
over HTTP to secure HTTPS.
Off
142
Description
Selects the length of time
before the printer times out
when printing over a USB
connection.
Returns all printer settings to
their default values.