Epson p10000 User Manual page 140

Setting Options
Platen Gap Standard
Wide +1
Wider +2
Widest +3
Drying Time Per Pass 0 seconds to 10 seconds
Paper Size Check On
Off
Paper Feed Stabilizer On
Off
Paper Skew Check On
Off
140
Description
Adjusts the gap between the
media and the print head.
Leave the setting at the
default for most media. If
printouts are smeared,
increase the setting.
Lets you adjust the amount of
time the head pauses
between each pass. If the
image is blurring on the
paper, you may need to
increase the drying time per
pass.
Automatically detects the
width of the loaded media.
Turn off this setting only if the
printer displays a paper
setting error when media is
loaded correctly. Changed
settings take effect when you
reload paper.
Caution: Disabling this
setting may cause the printer
to print outside the margins of
the loaded media and may
cause ink to build up inside
the printer.
Automatically detects and
corrects any paper feed pitch
changes. Disable this setting
when using any transparent
or colored media.
Stops printing when skewed
paper is detected. Leave this
setting turned on to avoid
paper jams.