Setting
Options
Nozzle Check
Print Nozzle Check Pattern
Printless Nozzle Check Pattern
Head Cleaning
All Nozzles
Various colors
Check and Clean
Nozzle
Head Alignment
Auto (Bi-D)
Manual (Bi-D)
Restore Settings
Cutter Maintenance
Adjust Cut Position
Replace Cutter
Normal
Heavy
—
132
Description
Prints a nozzle check pattern
in the specified location on
the media.
Checks the nozzles and
displays the results on the
LCD screen.
Lets you clean all or selected
colors (in pairs of two), based
on the nozzle check pattern.
Select Normal cleaning first.
If nozzles are still clogged,
select Heavy cleaning.
Automatically checks and
cleans any clogged nozzles.
Lets you automatically or
manually align the print head
when print results are grainy
or out of focus.
Restores the print head
alignment to its default setting
Lets you adjust or replace the
built-in cutter.
Adjust Cut Position: adjusts
the cutter position in
increments of 0.039 inch
(1 mm) from –0.12 to 0.12
inch (–3 to 3 mm).
Replace Cutter: positions the
cutter for replacement.