Epson p10000 User Manual page 190

LCD screen message Condition/solution
Paper Load Error The loaded paper is not detected by the printer. Check the following:
No paper detected. • If you are using roll paper, remove and reload the roll paper. Cut the
• If you are using poster board or a cut sheet, remove and reload the paper.
Paper Load Error Paper is jammed inside the printer. Remove the jammed paper.
Some paper has not
been fed.
Paper Eject Error Check the following:
Could not eject paper. • Press the OK button. If paper is jammed inside the printer, remove it.
• If you are using roll paper, make sure you selected Roll Paper as the
Paper Cut Error Press the OK button, pull down on the paper, and cut it using scissors or
another manual cutter.
Remove uncut paper.
Paper Size Error The loaded paper is not a supported width. Remove the paper and press the
OK button.
Loaded paper size is not
supported size. If the message still appears when you have loaded paper in a supported
width, set the Paper Size Check setting to Off on the LCD screen.
leading edge of the roll paper straight horizontally. Cut off any jagged or
folded sections of paper.
Make sure the paper is loaded straight and is not skewed.
Paper Source setting on the LCD screen.
190