Table of Contents
Advertisement
4.4.4 Management
This page provides the iServer's email, SNMP and alarm settings. SNMP (Simple
Network Management Protocol) is the protocol used by network management systems to
communicate with network devices that respond to SNMP connections for the purpose of
problem detections and corrections.
If SNMP and/or SMTP features are desired, please make sure iServer's network setting
as well as SNMP trap server and SMTP mail server are setup properly. Failure to do so
may cause iServer to be unresponsive while waiting for these servers to reply back.
Fields are described below.
4.4.4.1 Setup
Setup
Address
http://192.168.1.200
Readings
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Simple Network Management Protocol
SNMP Response Enabled – If this option is checked the iServer will respond to network
nodes broadcasting SNMP requests. The default is unchecked.
Make sure your network is setup properly (gateway, etc) before using SNMP feature
SNMP Community – Every SNMP communication takes place using a community
string. The default is Public.
Contact – This text field specifies the contact person for this node, together with information
on how to contact this person. This field takes up to 16 alphanumeric characters.
Location – This text field specifies the location of the iServer. For example it can be
"control station", which is the place where the iServer is located. This field takes up to 16
alphanumeric characters.
SNMP Trap Server – This field contains the IP address of the SNMP trap server located
somewhere on the network. The trap server listens for SNMP traps coming from the
iServer when there is an alarm condition (refer to Alarms Section 4.4.4.2 under the
Management page).
Web Link
Simple Network Management Protocol
SNMP Response Enabled
SNMP Community
Contact
Location
SNMP Trap Server
Simple Mail Transfer Protocol
SMTP Server
SMTP Server Port
From:
To:
Subject:
Reminder Interval
Transmission Delay
Save Changes
Figure 4.20 Management Menu: Setup
Setup
Setup
Alarms
0.0.0.0
25
Reset
31
public
None
None
0.0.0.0
60
mins
1
mins
Advertisement
Table of Contents
