Table of Contents
Advertisement
4.6 Chart (continued)
Data Source – The options are Live and Recorded.
If Live is selected the real-time data will be charted for the time indicated on the X-axis.
If Recorded is selected the stored data on the SD card will be charted for the time
indicated on the X-axis.
Alarm Relay Set Points – This option will hide or chart (normal) the set point values.
The bold option will thicken the displayed set point lines.
If Alarm Relays are disabled (in the Configuration menu) the set points for High
and Low alarms will not be graphed or displayed on the chart.
X-axis – This indicates the time, options includes one minute, one hour, one day, one
week, one month or one year.
Y-axis – The left Y-axis is dedicated to temperature 1. Either temperature 2 or
differential can be selected for the right Y-axis.
Style – This option will hide or chart (normal) the graph of the variables (temperature 1,
temperature 2, and differential). The bold option will thicken the displayed graphs.
Save Chart – Save the current graph in PNG (Portable Network Graphics) format. The
filename has extension .png. This option will require the Java Policy file to be setup.
Press on Help[?] for details. An alternate way to set up the Java Policy can be found in
Appendix G.
Print Chart – The displayed chart will be printed once the button is clicked.
If you want to access the "Chart" and/or the "Readings" applet from outside your
local network on which the iServer is connected, you must allow ports 1001
(Readings) and 2003 (Chart) on your Router.
4.7 Web Link
This page is configured from the Network menu under IP configuration.
Refer to Section 4.4.2.1.
Web Link
Address
http://192.168.1.200
Readings
Figure 4.36 Web Link
Web Link
Setup
Web Link
47
Advertisement
Table of Contents
