Recording; Start Recording; Figure 4.23 Recording Menu: Start Recording - Omega iSD-TH User Manual

4.4.6 Recording

This section includes all the parameters and settings for data recording, SD flash card
and recording status, data retrieval, and formatting the SD card. Fields are described
below.

4.4.6.1 Start Recording

Start Recording
Address http://192.168.1.200
Readings
Current Date:
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Interval – This is the time interval between each data. It can be between 1 to 3600
seconds.
Title – This is the header for each recorded data file on the SD flash card.
Quick Start Recording – If this button is clicked recording will start immediately.
Make sure your Current Date and Time are correct.
Type – The options are Wrap and Non-Wrap.
If Wrap is selected once the SD flash card is full the iServer will delete the old data
stored on the card in order to record the new data. Each time a new recording takes
place an old record will be deleted.
If Non-Wrap is selecetd the iServer will stop recording once the SD flash card is full.
Web Link
Start Recording Status Data Retrieval
2099/01/01
Interval (1-3600)seconds
Type
Wrap
Set Date and Time
Start Date yyyy/mm/dd
Stop Date yyyy/mm/dd
Set Weekdays (only for scheduled recording)
Mon Tue

Figure 4.23 Recording Menu: Start Recording

Setup
Format SD Card
(yyyy/mm/dd) Current Time:
Category
Start Time
Stop Time
Wed Thur
Start Recording
36
00:00:00
Title
Quick Start Recording
Continuous
hh:mm:ss(24 hours)
hh:mm:ss(24 hours)
Fri Sat Sun