4
Digital Zoom
5
Image Adjustment
6
Alarm
7
Playback
8
Logout
2.3.1
Image Adjustment
Click Image Adjustment button to open picture setup interface. See Figure 2-9. This interface is
displayed under a display of Image Adjustment.
Please refer to the following sheet for detailed information.
Parameter
Video
setup
When the video is in the original status, click it you can
select any zone to zoom in. In the non-original status, you
can drag the zoom-in zone in specified range. Right click
mouse to restore previous status.
Click it; you can use the middle button of the mouse to
zoom in/out the video size.
You can adjust image quality.
It moves to an alarm setting screen.
It moves to a playback screen.
(WV-V2530LK, WV-V2530L1, WV-V1330L1)
Click Logout button, system goes back to log in interface.
Figure 2-9
Function
It is to adjust monitor video
brightness.
It is to adjust monitor video
contrast.
It is to adjust monitor video
hue.
It is to adjust monitor video
saturation.
Note:
All the operations here apply
to WEB end only.
Please go to Setup ->
Image/Audio or Image ->
Image adjust to adjust
corresponding items.
8