Panasonic WV-V2530LK Operating Instructions Manual page 93

Note
• The cameras don't support "Auto(AutoIP)" and "Auto(Advanced)" of Network Settings.
• By unchecking the "Wait for camera restarting." checkbox, multiple cameras can be continuously
configured.
• For further information about each setting of the "Network Settings" page, refer to 6.3 Network.
IMPORTANT
• It may take for around 2 minutes to complete to upload the settings to the camera after clicking the
[Save] button. The settings may be invalidated when the LAN cable is disconnected before completing
the upload. In this case, perform the settings again.
• When using a firewall (including software), allow access to all UDP ports.
Note:
This manual is for reference only. Slight difference may be found in user interface.

All the designs and software here are subject to change without prior written notice.

All trademarks and registered trademarks mentioned are the properties of their respective

owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.

Figure 7-5
89