Parameter
Relay out
Alarm Delay
Send Email
Snapshot
See Figure 6-32.
Function
Enable alarm activation function. You need to select alarm output port
so that system can activate corresponding alarm device when alarm
occurs. (WV-V2530LK)
System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s. (WV-V2530LK)
If you enabled this function, System can send out email to alert you
when alarm occurs and ends.
You need to check the box here so that system can backup VMD
snapshot file.
Figure 6-32
59