Video Window Function Option - Panasonic WV-V2530LK Operating Instructions Manual

2.5 Video Window Function Option

The interface is shown as below. See Figure 2-11.
Please refer to the following sheet for detailed information.
SN Parameter
Original
1
Size
Full Screen
2
Width and
3
Height ratio
Fluency
4
Adjustment
Zoom and
5
Focus
Snapshot
6
Record
7
Easy Focus
8
Audio output
9
Bidirectional
10
talk
1 2 3 4
Function
Click this button to go to original size. It is to display the actual size of
the video stream. It depends on the resolution of the bit stream.
Click it to go to full-screen mode. Double click the mouse or click the
Esc button to exit the full screen.
Click it to restore original ratio or suitable window.
There are three levels of fluency for you to select. The default is
Normal. You may select fluent mode in case connection is slow.
Click this button and the zoom and focus interface appears on encode
setup bar, as shown in figure 2-12.
(WV-V2530L1, WV-V1330L1)
You can snapshot important video by clicking on this button. All
images are memorized in system folder: \ picture download (default).
You can go to Setup -> Image -> Image -> Path to modify the local
record save path.
For manual record. All records are memorized in Setup -> Image ->
Image -> Path.
When connected to Panasonic's recorder, record for Sub stream 2
may not work correctly.
Click it, you can see there are two parameters on the preview video：
AF Peak and AF Max.
AF Peak: It is to display the video definition during the focus process.
AF Max: It is the most suitable value for the video definition.
The close the AF Peak and AF Max is, the better the focus effect is.
(WV-V2530L1, WV-V1330L1)
Turn on or off audio when you are monitoring. (WV-V2530LK)
Click it to start or end bidirectional talk. (WV-V2530LK)
5 6 7 8
Figure 2-11
9 10 11
10