Panasonic WV-V2530LK Operating Instructions Manual page 32

Parameter
Sub
Compression
Stream 2
Image capture
size
Frame
rate(FPS)
Transmission
Priority
Bit Rate
I Frame
Interval
Function
There are three options: H.264 (main profile
standard), H.265 (mail profile standard) and MJPEG
encode.
H.264 ：Main profile encode mode.

H.265 ：Main profile encode mode.

MJPEG ：In this encode mode, the video needs

larger bit stream to guarantee the video
definition. You can use the max bit stream value
in the recommend bit to get the better video
output effect.
There are multiple resolutions. You can select from
the dropdown list.
For each resolution, the recommended bit stream
value is different.
NTSC: 1-30fps. PAL: 1-25fps
The frame rate may vary due to different

resolutions.
There are two options: VBR and CBR.
Please note, you can set video quality in VBR mode.
Under MJPEG mode, only CBR is available.
In CBR, the bit rate here is the max value. In
dynamic video, system needs to low frame rate or
video quality to guarantee the value.
The value is null in VBR mode.

Please refer to recommend bit rate for the detailed
information.
Here you can set the P frame amount between two I
frames. The value ranges from 1 to 150.
Recommended value is frame rate.
28