Panasonic WV-V2530LK Operating Instructions Manual page 92

Note
• When using a DHCP server and Network settings is DHCP, the IP address assigned to the camera
can be displayed by clicking the [Search] button of the "IP Setting Software".
• When duplicate IP addresses are used, the number of the camera with the duplicate address is
displayed in overlap.
• The displayed camera information is not automatically updated. Click the [Search] button to update
the information.
• It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses in
accordance with the protocol in use.
• The information displayed can be sorted by clicking the title of each displayed item.
• When the [Network Settings] button is clicked, the "Network Settings" screen is displayed and
network settings can be changed. For further information, refer to Changing Network Settings.
3. When "Please click here to download and install the plug-in" in the Live page is displayed, follow the
on-screen instructions to install the software.
• The "Live" page of the camera is displayed.
• If the viewer software (Plug-in software) cannot be installed or images are not displayed, click the
[Install] button next to [Viewer Software] from the CD launcher window to install the software.
Changing Network Settings
When changing settings related to the network settings, such as connection mode, IP address, and
subnet mask, click the [Network Settings] button in [IP Setting Software] screen.
The "Network Settings" screen is displayed. Enter each item and then click the [Save] button.
88