Table of Contents
Advertisement
To Retrieve the Internet Parameters for Backup
(3)
@select-domain to @end
(4)
@relay-domain to @end
(5)
@system to @end
(6)
@ldap to@end
(7)
@mib to @end
(8)
To Edit the Retrieved or Backup Internet Parameters File
After receiving your machine s email with the Internet Parameters, store the email file as text (.txt) on your
PC for backup purposes.
To change or update the Internet Parameters, follow the steps below:
1. Create a New Email Message, fill out the "To" and "From" Address line and the Subject line information
for section (1) below:
To
From
Subject
2. Open the backup, Internet Parameter text file. Copy the body text and paste it on the body of the newly
created email message.
3. Delete any headers that may be present in the body of the email, as unsupported data will be rejected.
The information following the "#" sign is ignored by your machine.
4. Edit a parameter and/or add additional Sender Name(s) or Domain Name(s).
5. When finished, use the "File/Save as..." command and save the updated file with ".txt" extension as a
backup.
6. Send the email message to your machine to update the Internet Parameters.
Edition 1.0
:
Defines up to 10 alternate Domain Names programmed in your machine for the
Selectable Domains in section (3) between @select-domain to @end block.
:
Defines up to 10 Domain Names programmed in your machine that have been
authorized to access your Internet Fax for Relayed XMT Request in section (4)
between @relay-domain to @end block.
:
Defines the following Internet Parameters programmed in your machine in section
(5) between @system to @end block.
(a) Default Domain
(b) Manager s Email Address
(c) Relay XMT Password
(d) Remote Password
:
Defines the following Internet Parameters programmed in your machine in section
(6) between @ldap to @end block.
(a) LDAP Server Name
(b) LDAP Login Name
(c) LDAP Password
(d) LDAP Search Base
:
Defines the following Internet Parameters programmed in your machine in section
(7) between @mib to @end block.
(a) Community Name(1)
(b) Community Name(2)
(c) Device Name
(d) Device Location
:
This header must be deleted before the email is sent to your machine for
reprogramming of Internet Parameters.
The information following the "#" sign is ignored by your machine, therefore, you
can leave it as is, or delete it if you wish.
:
Your machine's email address.
:
This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Internet
Parameters and for error message notification.
:
To Store data, type: #set parameters(password)#
299
DX-600/800
APR 2002
Advertisement
Table of Contents
Troubleshooting
