Panasonic DX-600 Service Manual page 53

3.4.3. Erasing the Master Firmware Card
1. Unplug the Power Cord to turn the machine OFF.
2. Install the Master Firmware Card into the machine with the Panasonic Logo facing outwards.
3. Plug in the Power Cord to turn the machine ON.
4. Perform the Service Mode 9-5 (Erace Flash Card).
5. The firmware is erased from the card and return to Service Mode default display.
6. Press "STOP" twice to return to standby.
7. Unplug the Power Cord to turn the machine OFF.
8. Remove the blank Flash Memory Card from the machine.
9. Plug in the Power Cord to turn the machine ON.
3.4.4. Firmware Version
<DX-800>
HOST
Edition 1.0
:
DX-800 A A V1.xxxx AU
Destination Code (Fax)
AU : USA / Canada
Firmware Version (V1.xxxx)
Language Code
A : US English, C-French & Spanish
B : US English, Spanish & Portuguese
b : English, French & Spanish
g : German, French & Italian
Firmware Type
A : Standard
B : Optional
Model Number
53
DX-600/800
APR 2002