Panasonic DX-600 Service Manual page 32

2.2.10. LANB PC Board (1036), SC PC Board (1001), ILS PC Board (1006),
SNS4 PC Board (1007)
(11)
(15)
Edition 1.0
(3)
(4)
(2)
(6)
(5)
(7)x7
(8)
(12)
(14)
(13)
(1) Remove the Left Cover (Refer to 2.2.2.).
(2) Remove 1 Screw (19).
(3) Release 2 Locking Spacers (431) and remove
the LANB PC Board (1036).
(4) Disconnect the LANB-LANC Harness (1838) on
the LANB PC Board (CN97).
(5) Remove 2 Locking Spacers (431).
(6) Disconnect all Connectors on SC PC Board.
(7) Remove 7 Screws (19).
(8) Remove the LANB Bracket (430).
(9) Remove the SC PC Board (1001).
(10) Move all Harnesses away from the front of the
Door Sensor.
(11) Release the Latch Hook and remove the ILS PC
Board (1006).
(12) Disconnect Connector CN73 on the ILS PC
Board (1006).
(13) Disconnect Connectors CN85 and 87 on the
SNS4 PC Board.
(14) Remove 1 Screw (19).
(15) Lift up the Paper Exit Actuator (730) and
remove the SNS4 PC Board (1007).
32
DX-600/800
APR 2002