Panasonic DX-600 Service Manual page 159

Hide thumbs Also See for DX-600:
Table of Contents

Advertisement

No.
Parameter
050 RING DETECT
MODE
051 Not Used
052 PULSE RATE
053
Not Used
054
055 BUSY TONE
CHECK
056 DIAL TONE
CHECK
(Except for USA
and Canada)
057 DC LOOP
CHECK
(Except for USA
and Canada)
058 COMM.JRNL
+IMAGE
059 CONF. RCV
REPORT ON
060 VERSION
061 TX/RX/PRT/CPY
COUNTER
062 PRINT
COUNTER
063 Not Used
064 SILENT
DETECTION
TIME OUT
065 SILENT
INTEGRATION
TIME
066 RING COUNT
(TAM)
067 Not Used
068 NYSE FAX
FORWARD
(For USA and
Canada only)
069 NYSE LOCAL
PRINT
Edition 1.0
Service Mode 1 : Function Parameter Table
Selections
1 = Normal
2 = Rough
1 = 10 pps
2 = 20 pps
1 = Off
2 = On
1 = Off
2 = On
1 = Off (will not check)
2 = On (checks)
1 = Off (without image)
2 = On (with image)
1 = Off
2 = On
Indicates the Host software
version.
TX/RX/PRT/CPY
1 = Off
2 = On
01 = 1 sec.
~
60 = 60 sec.
01 = 1 sec.
~
10 = 10 sec.
01 = 1 sec.
~
99 = 99 sec.
1 = Off
2 = On
1 = INC
2 = ON (Always)
Selects the quality of ringer detection. Use if the line
signal is out of regulation, set to "Rough" so that the
unit may detect the ringing signals.
Selects the dial pulse rate 10/20 pps.
Selects whether to detect the Busy Tone.
Selects whether to detect dial tone before dialing the
telephone number.
Selects whether the unit checks the DC Loop during
communication.
Selects whether the machine prints the COMM.
Journal with image.
Displays the transmitted, received, total printed and
copied document count.
Selects whether to print in the Fax Parameter List,
the counter information that is displayed in the
Function Parameter No. 61.
Select silent detection timeout time (TAM I/F).
Select ring detection integration time (TAM I/F).
Select ring detection count 1 to 99 times in one step
intervals on TAM I/F mode.
Selects whether the machine will forward the
incoming and outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax Forwarding
via Fax Parameter 054 is automatically disabled.
Selects the printing condition for the incoming faxes
after FAX Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON
: Always prints.
159
Function
DX-600/800
APR 2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx-800

Table of Contents