Panasonic DX-600 Service Manual page 110

4.4.3. Vertical White Lines
Is the printout in Service
Mode 3 normal?
Is the recording paper damp?
Is the Toner Cartridge
operational?
Are there any foreign particles
or stains blocking the Laser
Beam path?
Are there any foreign particles
or stains on the BTR?
Are the Fuser and Pressure
Roller surfaces clean?
Edition 1.0
START
Yes
No
Yes
No
No
Yes
Yes
No
Yes
No
No
Yes
END
P
Check the Scanner mechanism.
Replace the recording paper.
Replace the Toner Cartridge .
1. Remove the particles from
the laser beam path or clean the stains.
2. Replace the Laser Unit (LSU).
1. Clean the BTR with a soft, dry cloth.
2. Replace the BTR.
Clean or replace the rollers.
110
DX-600/800
APR 2002