Panasonic DX-600 Service Manual page 39

2.2.15. Fuser Lamp (732), Exit Roller (719), Fuser Roller (709),
Pressure Roller (706)
(2)
Black
(8)
(9)
Edition 1.0
(4)
(3)
(6)
(7)
White
(5)
(1) Remove the Rear Cover (Refer to 2.2.12.) and
the Fuser Unit (Refer to 2.2.14.).
(2) Remove 1 Screw (4N).
(3) Remove the PSU-Fuser Harness (1028) and
Fuser Lamp Terminal B (731).
(4) Remove the Fuser Lamp (732).
Caution:
When reinstalling the Fuser Lamp, make sure that
the Fuser Lamp is inserted into the Fuser Unit as
illustrated. Do not touch the glass portion of the
Fuser Lamp with bare hands. Grease from
fingerprints will shorten its life cycle, use isopropyl
alcohol to clean fingerprints.
Caution:
When reinstalling the Fuser Lamp, make sure that
both ends of the Fuser Lamp fit into the projected
area of the Fuser Lamp Terminal A (724) and the
Fuser Lamp Terminal B (731).
(5) Remove the E22 Gear (722).
Caution:
You may need to use force to pull out the Gear.
(6) Remove the Right and Left P3.5L11.2
Bushings (720 and 721).
(7) Remove the Exit Roller (719).
(8) Remove 2 Screws (4N).
(9) Remove the Fuser Cover (723).
39
DX-600/800
APR 2002